i30 Owners Club
MODIFYING OR DETAILING YOUR I30 => ELECTRICAL | ELECTRONIC | AUDIO => Topic started by: jwhjwb on November 07, 2016, 07:30:09
-
2011 FD CW 2L petrol & Auto Trans. Am considering fitting an " Engine Watchdog" temperature overheat warning alarm. Has anybody any experience with these units. The T4 Unit I am considering is a dual unit, monitors motor and auto trans. Any comments appreciated re
Reviewing the unit:
Where to fit the unit on/under the dash:
If worthwhile monitoring the auto trans temperature:
Most practical hard-wire point to use that is on/off via the ignition (eg. rear of lighter socket)
There is now a T1 Unit which super-cedes the still available T2 Unit - both only monitor the Engine Temp.
FIY: I have just completed fitting reversing sensors (a cheap kit) & working well. Difficult but not difficult if I had to do another on a similar veh.
Send me a PM if you need to talk by phone.
-
@cruiserfied @nzenigma
-
Why the need to monitor it any better than the standard system does? are you going to use it for a lot of towing?
You might also find a cheap OB11 plugin app that might provide the same functions :undecided:
I wouldn't be placing personal phone numbers on an open forum either :eek:
EDIT! I see Phil removed the number :goodjob:
-
Why the need to monitor it any better than the standard system does? are you going to use it for a lot of towing?
:
I'm repeating Craig's sentiments, why reinvent the wheel?
The ECU is already monitoring various temperatures and you have the best overall device right in front of you... a coolant temperature Gauge.
If there is one device I would add to the i30, its an oil pressure gauge. Old school, but gives a lot of info if the car is doing heavy work or has been mistreated.