Hi everyone, finally ticked off another mod from my list for my little blue beast.
Aftermarket cruise control kit was purchased from
cruise controls | ecruise controls | Autostrada Brisbane great people here in Brissy. Was around $700 which included a genuine factory steering wheel switch and wiring. Most likely cheaper for one with just a aftermarket stalk (but who wouldn't want a factory setup amirite?)
They do offer installation (but wheres the fun in that?)
Here is the kit in all it's beautiful glory
Basically,
1. Remove lower dash panels
2. Find suitable location for cruise module
3. Plug in bridging connectors to clutch, brake, and accelerator pedals
4. Solder in 1 x wire to speed indicator wire from obd2 port
5. Remove steering wheel and replace blank cover with cruise control switch
6. Install new wiring connector to cruise switch, stereo switch, and clock spring.
7. Insert 3x wires from module to existing plug behind steering wheel (no soldering needed)
8. Drill hole for cruise indicator light
9. Test, and then reassemble dash!
Very happy with the result works great, and can't wait to go on a road trip now!
Here are some more pics, didn't take too many because I ended up doing it at night
Location of cruise module on top of aircon vent above the clutch pedal
Wire soldered to OBD2 wire
New cruise light
Cruise switch