[JOCKs]

So I'm just trying to get some information, long story short this is a friends car. Their is a leak at the rear of the engine. Between firewall and engine block.  From what i can tell, their is a brass T piece coming off the head or block which goes to the firewall and expansion tank (rubber hoses).  At the base of the tee off which connects to the expansion tank their is a hairline crack which has expanded over time.

My theory is either the hose has gone hard over time and the engine torquing over time has cause it to fracture. But that's besides the point. I'm trying to figure out how far i have to rip into the engine to replace the part but cant seem to find any diagrams or service manual online. Would anyone be able to help me out ?

[Phil №❶]

Need to know the year and Mode eg FD or GD. GD is current shape.

[Doggie 1]

It's an '08 2.0 litre turbo diesel, Phil.      

[Phil №❶]

  

Oh yeah, right.

The pic in the workshop manual is not very helpful. It doesn't show the expansion tank, but here it is for what it's worth.

There is hidden content here which only members can see. Please Login or Register.

[JOCKs]

Well i could be wrong, it could be a 1.6 crd, i was googling and she said that sounded familiar. I have never owned a Hyundai before, still skeptical about the Koreans. But that just the old dog in me. As far as i know its an "08' i30 turbo diesel" with a coolant leak 

Just for reference can someone please post up the 1.6 one too. Thanks

[Doggie 1]

Where is the car, what country?
That might give us a clue as to what engine it has.
It's an FD model, we know that.
Not many 2.0 litres around as far as I'm aware, mostly 1.6 in most markets.

[Phil №❶]

Just for reference can someone please post up the 1.6 one too. Thanks

1.6 is shown differently, so not easy to do.

This is the best I can find.


There is hidden content here which only members can see. Please Login or Register.

[Asterix]

You can pretty easy determin if it's a 1,6 or 2,0

The 2,0 have a timing belt, the 1,6 is with chain.

[JOCKs]

Thanks guys. Really appreciate it, the car is in Melbourne, AU. I don't have the car here but from what i can remember its a DOHC engine. If that makes any kind of difference. I pulled off the engine cover and spotted the leak and that's as far as i went.

[elantraelite]

It's definitely a 1.6 diesel. We never got the 2.0 diesel.

The FD i30 in Australia got:
1.6 Gamma (petrol)
2.0 Beta (petrol)
1.6 U / U2 (diesel)

[JOCKs]

Good and bad news, Well i did find the right part but its all in russian. So their seems to be a few different parts or revisions using the same part number "25620P" which is i believe is for the whole assembly. "25621W" is the pipe alone. Even googling that will give you a few different results. I'm guessing they moved either the expansion tank or heater core in different models.

Not even sure if this will help anyone, but if your looking for the pipe in the picture below. I'm pretty sure the part number is "256212A600".

http://img223.imagevenue.com/img.php?image=05825_25255C11_122_1168lo.jpg

Administrator Comment

Careful! There is a dodgy pop up when you click that image link!

[Phil №❶]

Nice arse, though 

[Dazzler]

Nice arse, though 

When he said it was at the rear of the motor I wasn't expecting that! 

[The Gonz]

No dodgy pop-ups for me. I'm running Ghostery.

[rustynutz]

Careful! There is a dodgy pop up when you click that image link![/admin]

Of course I just had to click it...
Disappointingly there wasn't any pop up for me! 
I guess "Adguard" must be doing it's job... 

[Phil №❶]

I got a wind turbine pop up 1st time. Closed that, the scrolled to bottom of page. 

The turbines don't appear any more, just had to check again.

[The Gonz]

Dammit, what did I miss?