Hi,
I'm having an issue with the window. Sometimes the window won't work at all from their door or the driver controls. Often it'll go down and not up again, sometimes leaving it for a while will see it controllable again. Anyway, it finally stopped working today fully down whilst in a public carpark hundreds of miles from home. I had the door panel off but cannot understand the wiring based on the multi control and isolation switch on drivers door. With a combination of flat headed screwdriver, a small pair of scissors and a pair of jump leads I was able to connect the battery directly to the winder motor and that worked just fine. I'm home now but need to understand the wiring so I can start to trace the problem which is obviously not the motor itself. I saw a couple of wiring diagrams on here but the colours were all wrong. Does anyone know where I can begin?
*Update - I have the passenger door switch off and continuity / resistance is just fine both ways on the switch. I'm thinking this could be an issue with the isolation circuit rather than the main power? I'm going to test voltage tomorrow.
Thanks
Graham