[cartoys]

New member, this is my first post and this question as probably been asked before. Can anyone please provide me with a detailed description on how to remove or partially remove the front bumper to get to and replace the fog lights to install DRL's on my 2015 i30 activeX 5 door hatch.
I am also concerned how the margins come apart between the bumper and front fenders without damage.

Thanks Cartoys. 

[Dazzler]

  cartoys,

I found this thread, but not much good..  I'll keep looking though.

How to remove front bumper

Found this which might help...

How to remove the bumper from a 2011+ Hyundai Elantra - YouTube

[cartoys]

Thanks Dazzler it should be very similar to my car I will check it out tomorrow re the location of the screws and bolts and seeing the video how the margins come apart as made me feel a lot easier don't want any damage.
If you can find the information or video for my model that would be great.
Cartoys.

[Dazzler]

i30 is k/a elantra gt in the USA

[cartoys]

Thanks again front bumper removed and DRL,s fitted no dramas. Now I need help to replace the single horn and fit twin horns the wiring has a 2 wire plug but the horns have spade connectors do I have to make a special new harness as I assume I will have to cut off the original plug, is there anything else to lookout for like continuity and relays Cartoys   

[Dazzler]

Thanks again front bumper removed and DRL,s fitted no dramas. Now I need help to replace the single horn and fit twin horns the wiring has a 2 wire plug but the horns have spade connectors do I have to make a special new harness as I assume I will have to cut off the original plug, is there anything else to lookout for like continuity and relays Cartoys   

I imagine the body of the horn just earths through the mount and spade fitting just connects to power like existing horn, but don't quote me (let's see what others say)