i30 Owners Club

THE GARAGE (SERVICE, MAINTENANCE & REPAIR) => GENERAL => Topic started by: BrendanP on June 25, 2021, 20:35:12

Title: HOW TO: Diagnose & fix slack handbrake on i30 FD
Post by: BrendanP on June 25, 2021, 20:35:12

I've just been investigating why the handbrake on my partner's car has suddenly gone slack. This is a common problem so this time I posted a video on YouTube to show how to diagnose it.

 :link: Slack handbrake on Hyundai i30 - YouTube (https://www.youtube.com/watch?v=0GvLQdljHcQ)https://www.youtube.com/watch?v=0GvLQdljHcQ

When I took the disc off the car, the lever wasn't sticking, but I found that the circlip that retains the pivot pin had popped off and the pin was halfway to falling out completely. I had a new lever so didn't attempt to refurbish the old one. Over 10 years and 219,000 miles, the slot in the pin that the circlip snaps into had almost disappeared. As mentioned in the video, if the handbrake becomes slack, find out what it is asap.

Title: HOW TO: Diagnose & fix slack handbrake on i30 FD
Post by: Shambles on June 25, 2021, 21:01:43

Absolutely brilliant @BrendanP  :victory: :goodjob:

If you don't mind I'll rename your topic, sticky it and post it to the portal page.

Cracking post!