i30 Owners Club

THE GARAGE (SERVICE, MAINTENANCE & REPAIR) => GENERAL => Topic started by: SankarAu on April 04, 2024, 04:55:08

Title: Tailgate Release Button Rubber protector detioration and failure
Post by: SankarAu on April 04, 2024, 04:55:08

Hi,
Here's a tip for those who face the issue of the rubber of the Liftgate/Trunk/Hatch Release/Opening Switch deteriorating or crumbling. Don't leave it for too long or the internal switch mechanism will fall out and the following fix will be moot. I was lucky, that happened to me but I was able to find it on my garage floor!

I cut out a piece of bicycle inner tube (you can use any thin and flexible rubber) and glued it into place. It's out of sight so I didn't worry too much about how it looked. Anyone could do a prettier job.  :)

I reckon I saved a few quid.

Good luck.

Cheers,
S

(https://i.ibb.co/BK06wfZ/Fix.jpg) (https://ibb.co/Dg0ML1C)

Title: Re: Tailgate Release Button Rubber protector detioration and failure
Post by: The Gonz on April 04, 2024, 08:14:24

Here's my solution for my brother's Kia, compatible with the Hyundai:

 :link: STL file Kia Rio Boot Release Switch Repair 👢・Design to download and 3D print・Cults (https://cults3d.com/en/3d-model/gadget/kia-rio-boot-release-switch-repair)

Title: Re: Tailgate Release Button Rubber protector detioration and failure
Post by: BrendanP on May 25, 2024, 16:23:23

I just replaced the switch on my car, and also on a similar car we just bought for my partner. About £11 for a 3rd party equivalent. It's quite easy to prise out the old switch at one side, then snip or break off the retaining tab. Push it back in, then lever it out on the other side, it's then easier to pull out the other side where the tab has been removed.
(https://i.ibb.co/QHmXnLC/old-switch.jpg) (https://ibb.co/94YG26V)

(https://i.ibb.co/sFrmNmv/new-switch.jpg) (https://ibb.co/2jBnCn7)

Title: Re: Tailgate Release Button Rubber protector detioration and failure
Post by: Greyhound on May 25, 2024, 17:58:20

Brendan, is that a complete switch (so you have to swap the wiring) or just a rubber/plastic cover for the actual switch?

Title: Re: Tailgate Release Button Rubber protector detioration and failure
Post by: BrendanP on May 25, 2024, 23:49:44

That's for a complete switch, the rubber boot is integral to it. Just prise the old one out, unplug the connector, plug it into the new switch and snap it into position. The OEM part number is 81260-A5000, and is for the GD hatchback. I could have paid £40+ for a genuine Hyundai/Kia part, but they're not exactly proving to be very durable. I'm surprised at the number of second-hand ones being offered on eBay where the rubber boot is falling apart.