i30 Owners Club

GOT PROBLEMS OR ISSUES? => GENERAL => Topic started by: Dazzler on September 24, 2017, 10:22:15

Title: Check BSD System message on my MY18 PD SR
Post by: Dazzler on September 24, 2017, 10:22:15
Did nearly 700 kilometres this weekend in my PD SR. Performed flawlessly in almost every way.

However, just before we headed home Got a warning triangle on the dash and a message between the speedo and taco saying "Check BSD System" and the blind spot detection system in both mirrors stopped working.

It didn't reset when I stopped a couple of times on the way home and pressing the button marked with the BSD symbol did nothing (no indicator light lit or went out)

All other safety systems seemed to be still working. Automated Cruise, Lane departure warning, Rear cross traffic alert. etc..

I thought it worked from cameras in the bottom of the mirrors do I cleaned the mirrors and housings with a damp wipe, but made no difference.

A bit of a quick google when I got home suggests the sensors are n the rear bumper which is pretty dirty, so I will try cleaning that tomorrow before contacting the dealer. 
Title: Re: Check BSD System message on my MY18 PD SR
Post by: MIY on September 24, 2017, 10:26:26
Yes, sensors are located in the rear bumper for BSD. So try to clean them.
I got the front camera detection message a few times when it was heavy rain, but disappeared 1-2 minutes after the wipers did their job and the considerable amount of water stopped.
Title: Re: Check BSD System message on my MY18 PD SR
Post by: Dazzler on September 24, 2017, 10:48:09
Yes, sensors are located in the rear bumper for BSD. So try to clean them.
I got the front camera detection message a few times when it was heavy rain, but disappeared 1-2 minutes after the wipers did their job and the considerable amount of water stopped.

Thanks. pretty dirty old day today. Lots of spray coming up off the road. Was getting dark and I was tired by the time I got home.  :cool:
Title: Re: Check BSD System message on my MY18 PD SR
Post by: Dazzler on September 25, 2017, 04:44:59
I gave my car a thorough wash and it didn't make any difference. So it is booked in Wednesday for an investigation.  :undecided:

From a quick google doesn't look like a very common issue.

Will keep you posted.  :cool:

Title: Re: Check BSD System message on my MY18 PD SR
Post by: John B on September 25, 2017, 05:16:43
Sell it  :snigger:
Title: Re: Check BSD System message on my MY18 PD SR
Post by: Shambles on September 25, 2017, 08:28:16
So "PD" equates to "Pretty Dirty" then? :snigger:

My "Fairly Dirty" model was never as clean as my "Generally Dirty" derivative.


Unlucky Dazz - hope it gets sorted easily, but I'm going to guess your mechs won't have a clue. I said it first.
Title: Re: Check BSD System message on my MY18 PD SR
Post by: Dazzler on September 25, 2017, 10:17:57
So "PD" equates to "Pretty Dirty" then? :snigger:

My "Fairly Dirty" model was never as clean as my "Generally Dirty" derivative.


Unlucky Dazz - hope it gets sorted easily, but I'm going to guess your mechs won't have a clue. I said it first.

You are a funny man... Yeah, I'm guessing they will clear some codes and it will return the next day.. I'll do some more research before Wednesday then give them a timeline with what they need to do and what I expect of the outcome.  :D

Sell it  :snigger:

I might have to use those non existent "Lemon" laws... I'm not too fussed about that feature. I can still turn my neck (a bit)

If it had been the Autonomous cruise all hell would have broken loose!  :evil:
Title: Re: Check BSD System message on my MY18 PD SR
Post by: John B on September 25, 2017, 10:25:55
Joking aside  Dazz, I hope it is a small problem that is easily solved. :Good_luck:
Title: Re: Check BSD System message on my MY18 PD SR
Post by: Dazzler on September 25, 2017, 10:27:22
Joking aside  Dazz, I hope it is a small problem that is easily solved. :Good_luck:

Cheers John, you are a good fella.  :goodjob:
Title: Re: Check BSD System message on my MY18 PD SR
Post by: Dazzler on September 27, 2017, 03:47:35
Dropped it in about 9 am this morning an was told should be ready by Lunch time. Service guys offered me a lift and sales guys offered me a loan car if I wanted it... But I needed a good walk!

By the time I did 6000 steps and had a visit to the library and some well earned morning tea it was after 11am and raining so I got them to come and collect me from town.

The service guys were just about to ring me to tell me it was sorted.

Apparently the system had just "taken a hissy fit'  So they reset the codes, reloaded the software and  tested it. The warning light and error message are gone, so we shall see.

The test drive must have been interesting as I'm usually in the good economy range (top 15% or better on autolink) but today's rating is now "Normal" top 52% ... Although says top speed today only 73 kph?     
Title: Re: Check BSD System message on my MY18 PD SR
Post by: Dazzler on October 10, 2017, 20:21:20
Did about 450 kilometres yesterday. Had a brilliant day including a 1000 metre climb into the central lake country. My SR was brilliant. Gobbled up the very steep road and averaged less than 7 L/100kms.

However, the blind spot monitoring had another hiccup (3 times) resetting itself each time I stopped and restarted the car. I didn't make special stops, just waited until I needed to for other reasons.

Different message this time. "Blind spot monitoring disabled - radar blocked". Or something like that!!

On the single lane carriageways I was driving on it wasn't really going to affect me, but I suspect there is some problem with that sensor. :cool:

I will leave it for a while and see if it comes right.
Title: Re: Check BSD System message on my MY18 PD SR
Post by: nzenigma on October 10, 2017, 21:18:07
Interesting problem. Hope they sort it for you quickly. As noted, it doesn't seem to be a common drama, so the techs will be guessing at this stage.
Thanks Dazz, I have added "taken a hissy fit" to my advice list.  :D
SimplePortal 2.3.5 © 2008-2012, SimplePortal