i30 Owners Club
MODIFYING OR DETAILING YOUR I30 => EXTERIOR => Topic started by: arcteryx on July 04, 2022, 07:00:28
-
Picked up a new CN7 i30 Sedan on Friday and by Saturday made a few changes to the badging (found this forum while researching views on debadging). Wanted to get a sleeker black and white look by dechroming things. Sharing the results
The question is - leave the Hyundai logo filled in and embossed, or remove the fillins to just have the black logo
(https://i.ibb.co/FWg1TP3/20220703-160131.jpg) (https://ibb.co/pPJTFmw)
(https://i.ibb.co/cCdWpVQ/20220703-160154.jpg) (https://ibb.co/qWwH4Vp)
(https://i.ibb.co/HK7rCZY/20220703-160440.jpg) (https://ibb.co/BfLgGkj)
(https://i.ibb.co/MfkTfr1/20220703-160127.jpg) (https://ibb.co/dt49tFp)
-
It'll look much better with the fill in's removed imo.
-
It'll look much better with the fill in's removed imo.
I agree. It will look like a dark oval as it is. Toyota? Ford? Can't tell from a distance.
-
Good points! I figured i'd remove bits progressively (and conservatively) since I can only do it once (short of doing the whole thing again)
-
Another option is to leave the black fillins and peel the logo so it ends up chrome with a black background
-
Another option is to leave the black fillins and peel the logo so it ends up chrome with a black background
Then it wouldn't be the black and white look you were originally after :)
I removed the inserts/fillins on my own car, better contrast between black /silver and would be the same for black/white
(http://i.imgur.com/d8Njiua.jpg)