i30 Owners Club

Interior LED light

0 Members and 1 Guest are viewing this topic.

Offline kudykam

  • 1st Gear
  • *
    • Posts: 2
Hi,
I have bought an interior led lights  from
http://www.koreancarstyling.co.uk/Hyundai/i30/Interiorstyling/i30LEDInteriorLights.htm
but they sent me somthing simmilar to this
http://www.sharkracing.com/acecart/bin/shop.cgi?action=view&itemID=ledinterior_1_2&cate=011900000
(especially connectors looks the same)
On the package is korean web: tunfac.com and on the light is written for Hyundai Sonata.

I dont know how to mount this lights to the car. I managed to fit rear lights, but dont know how to mount front lights.
Any help, please?


Offline Dazzler

  • Admin
  • *
  • Laughter is the best medicine...
    • Posts: 67,423

    • au Australia
      Devonport Tasmania

  • Best Car Forum on the Net
Welcome kudykam...I will let one of "our" technicians answer that... :wink:
  • 2021 MG PHEV ( had 4 x i30 plus a Getz an Elantra and a Tucson)


Offline Myowni30

  • 5th Gear
  • *
    • Posts: 910

  • Midlands, UK
Hi,
I have bought an interior led lights  from
http://www.koreancarstyling.co.uk/Hyundai/i30/Interiorstyling/i30LEDInteriorLights.htm
but they sent me somthing simmilar to this
http://www.sharkracing.com/acecart/bin/shop.cgi?action=view&itemID=ledinterior_1_2&cate=011900000
(especially connectors looks the same)
On the package is korean web: tunfac.com and on the light is written for Hyundai Sonata.

I dont know how to mount this lights to the car. I managed to fit rear lights, but dont know how to mount front lights.
Any help, please?


koreancarstyling are selling the same lights on eBay for £39. Hope you have not paid the £79 shown on their own web site.


Offline kudykam

  • 1st Gear
  • *
    • Posts: 2

Offline Myowni30

  • 5th Gear
  • *
    • Posts: 910

  • Midlands, UK
To remove the front map lights:

1.  open the glasses unit
2.  look up into the open unit, then remove the 2 cross head screws
3.  the whole unit will then pull down and out, but you need to un-plug the wiring connector
4.  on the unit, remove the 4 small cross head screws on the grey coloured section
5.  now that will un-clip and reveal the bulbs

You will now have to see how the leds will fit into the unit



Unread Posts

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal