i30 Owners Club

MODIFYING OR DETAILING YOUR I30 => ELECTRICAL | ELECTRONIC | AUDIO => Topic started by: risgeo on April 07, 2017, 02:10:42

Title: Fd double din fascia
Post by: risgeo on April 07, 2017, 02:10:42: Hi all,
Does any body here have a double din fascia for sale for an 09 fd i30 for sale. Looking to upgrade my head unit.
Located in sydney.
Title: Re: Fd double din fascia
Post by: CraigB on April 07, 2017, 04:12:38: EBay are your best bet, and there's one to pickup in NSW :) :link: HYUNDAI i30 - 2007~2013 - 2Din Dash Fascia Kit | eBay (http://www.ebay.com.au/itm/HYUNDAI-i30-2007-2013-2Din-Dash-Fascia-Kit-/201875523600?hash=item2f00b80810:g:Y4EAAOSwol5Y30yc) though the deciding factor is if yours is auto or manual aircon controls :undecided:
Title: Re: Fd double din fascia
Post by: eXDee on April 08, 2017, 07:30:26: There's another thread about this on here, I recall it mentioned that aside from air con, the fit might not be perfect for right hand drive, as the majority of these third party fascias are designed for left hand drive.
Title: Re: Fd double din fascia
Post by: CraigB on April 08, 2017, 07:41:22: Quote from: eXDee on April 08, 2017, 07:30:26
There's another thread about this on here, I recall it mentioned that aside from air con, the fit might not be perfect for right hand drive, as the majority of these third party fascias are designed for left hand drive.
If it's a symmetrical fascia, same both sides then there shouldn't be an issue.
Title: Re: Fd double din fascia
Post by: elantraelite on April 08, 2017, 22:50:45: Quote from: CraigB on April 08, 2017, 07:41:22
Quote from: eXDee on April 08, 2017, 07:30:26
There's another thread about this on here, I recall it mentioned that aside from air con, the fit might not be perfect for right hand drive, as the majority of these third party fascias are designed for left hand drive.
If it's a symmetrical fascia, same both sides then there shouldn't be an issue.
The centre stack in the FD does angle towards the driver, the storage compartment isn't angled so I'd imagine that there is a LHD and a RHD part

Sent from my Pixel using Tapatalk
Title: Re: Fd double din fascia
Post by: The Gonz on April 08, 2017, 23:52:28: That's right. For it to be a good fit, it would have to be other than symmetrical and in the correct left/right orientation.