Tha Original i30 Owners Club

PICTURES & VIDEOS => MEMBERS i30s => Topic started by: Noel on November 25, 2008, 06:42:44

Title: Noel's TOY~!!!!
Post by: Noel on November 25, 2008, 06:42:44
I am Noel form Korea~!!!  :biggrin:


[deleted]
Title: Re: Noel's TOY~!!!!
Post by: Thumper on November 25, 2008, 07:35:35
Carbon bonnet. Nice.  :twisted:
Title: Re: Noel's TOY~!!!!
Post by: teamgeorge on November 25, 2008, 07:43:25
i want a carbon bonnet...  :wink:
Title: Re: Noel's TOY~!!!!
Post by: Shambles on November 25, 2008, 08:13:50
Nice one Noel, welcome to the club  :biggrin:

Nice bonnet. Can I have it? Please?
Title: Re: Noel's TOY~!!!!
Post by: teamgeorge on November 25, 2008, 08:32:00
how much $$$? for the bonnet
Title: Re: Noel's TOY~!!!!
Post by: Dazzler on November 25, 2008, 09:07:45
Hi Noel & Welcome,

Nice car.. Got some more pictures... :question: :razz:
Title: Re: Noel's TOY~!!!!
Post by: Noel on November 25, 2008, 10:52:49
I spent $400 US dollors for carbon bonnet. the picture was taken almost 4months ago.
 
Title: Noel's toy 2nd post~!!!
Post by: Noel on November 25, 2008, 11:09:12
These are previous pictures of The Toy~!!!
The girl is not a toy~!! She is my wife  and her middle name is 'the lord'
I will upload current picture soon~!!
 

[deleted]
Title: Re: Noel's toy 2nd post~!!!
Post by: Rubix on November 25, 2008, 11:42:00
Nice pics Noel. I like those wheels - especially how they look silver from side, but dark grey like the car from above.
Title: Re: Noel's toy 2nd post~!!!
Post by: EymaTeapot on November 25, 2008, 12:03:36
Very nice Noel, and nice colour :biggrin:
Title: Re: Noel's toy 2nd post~!!!
Post by: Dazzler on November 25, 2008, 12:11:33
Nice pics Noel. I like those wheels - especially how they look silver from side, but dark grey like the car from above.

I could be wrong but I think they are two different sets of wheels?
Title: Re: Noel's toy 2nd post~!!!
Post by: Rubix on November 25, 2008, 13:04:15
Nice pics Noel. I like those wheels - especially how they look silver from side, but dark grey like the car from above.

I could be wrong but I think they are two different sets of wheels?
That was my second thought, but there were the same number of spokes and other than colour they're so similar, so I stuck with my third thought.
Now checking one MORE time and my fourth thought is that the yellow pin is only in one photo, plus the top silver ones have bolts x 5 and holes x 5, the bottom dark grey only have bolts x 5. So you're right.
Title: Re: Noel's toy 2nd post~!!!
Post by: Noel on November 25, 2008, 14:23:31
Hey guys~!
My answers are as below~~
My toy's first wheels are Rays Gram light~!! (not in the picture)
Sencond(first pic.) wheels are Enkei rs6 (five months ago)
and the second wheels are Weds SA90(3months ago)
Currently, I am using Enkei RPF-01
I have been changed wheels for refresh.
and i am searching a new wheels for the toy~!!!
 


Title: Re: Noel's toy 2nd post~!!!
Post by: Hemmi on November 25, 2008, 16:51:09
niiiice  8)
Title: Re: Noel's toy 2nd post~!!!
Post by: Shambles on November 25, 2008, 17:07:51
No credit crunch over there then  :rolleyes: 8)
Title: Re: Noel's TOY~!!!!
Post by: eye30 on November 25, 2008, 19:11:07
Welcome Noel
Title: Re: Noel's toy 2nd post~!!!
Post by: camerooney on November 26, 2008, 07:01:37
Beautiful car and beautiful wife
 :biggrin:
Title: Re: Noel's TOY~!!!!
Post by: Rubix on December 01, 2008, 02:48:44
(http://i16.ebayimg.com/04/i/001/1e/f5/1b4c_1.JPG)

What do you think of these rims?

I found them on ebay. Too bad they are to fit a Chrysler 300c, or a Jeep Grand Cherokee  2001 up & Jeep Commander 2007 up.  :mad:  :'(
Title: Re: Noel's TOY~!!!!
Post by: Dazzler on December 01, 2008, 07:18:23
 :eek: Might look ok on a red i30  8)
Title: Re: Noel's TOY~!!!!
Post by: Shambles on December 01, 2008, 08:33:39
:eek: Might look ok on a red i30  8)
.. or a pram  :P
Title: Re: Noel's TOY~!!!!
Post by: ozsnowman on December 01, 2008, 11:55:33
I want that carbon bonnet! :D
Title: Re: Noel's TOY~!!!!
Post by: Lakes on December 01, 2008, 18:56:37
Hi Noel, nice bonnet, judging by how heavy the stock bonnet is to lift, you would have a good weight saving with the carbon bonett. if there was a large enough demand, i know a guy here in Sydney australia that could produce carbon bonnets, just would need enough orders to justify making a mold.
SimplePortal 2.3.5 © 2008-2012, SimplePortal