The Original i30 Owners Club
GOT PROBLEMS OR ISSUES? => PETROL => Topic started by: axisacco on June 26, 2014, 12:35:55
-
Hi, I have to replace the heater/Ac blower motor in my car, I have worked out how to remove the door side of the glovebox mounting panel but cannot figure how how the radio side can be removed....
Any advice / tips would be much appreciated.
-
just wondering why this isn't covered by warranty,but no.no idea's here,took me ages how to work out how to take the clips out to drop the glovebox to change the cabin filter
-
:whsaid:
Moderator Phil my have info when he sees your post.. may have to take the radio out altogether! :undecided:
:wttc:
-
Not necessary to touch the glovebox, apparently.
:link: 2012 fd blower motor replacement.pdf - Google Drive (https://drive.google.com/file/d/0B8ANHWfNw-qjT3N4dzZuWkZxQkU/edit?usp=sharing)
Hope this helps.
EVERYONE, PLEASE UPDATE YOUR CAR PROFILE, SO I KNOW HOW TO HELP YOU PROPERLY
This is for model FD 2012, should be typical for other years / variants.
-
:ta: Phil :goodjob:
-
The vehicle is fitted with dual controls, I have been told to allow access the glovebox and it's mounting plate has to come out.
Problem is how to detach it from dash near radio
-
Do you know if that's possible, or does the whole dash have to come out and be modified. When the car is assembled, the whole dash is usually inserted as a single complete unit :exclaim:
-
thanks Phil,
no I am unsure whether it can be done I'm thinking that taking it to the sparky will be best option :)
-
:wttc: to yet another West Aussie. :goodjob:
-
Have you been on the campaign trail, Doggie? :eek:
-
I do my best. :mrgreen:
It gets lonely over here on the left side of the country.
-
So you DO have LEFT leanings.... :whistler:
-
:mrgreen: