Post by: i30manUK on July 13, 2008, 17:41:17
I wanted to see the speakers, so the door card came off. Here's how...
1. Door card in place...
(http://i53.photobucket.com/albums/g78/chubbylover88/DSCF5251.jpg)
2. Nifty little hinged screw cover behind door handle - unscrew screw...
(http://i53.photobucket.com/albums/g78/chubbylover88/DSCF5239.jpg)
3. Another nice little hinged screw cover in door pocket - unscrew screw...
(http://i53.photobucket.com/albums/g78/chubbylover88/DSCF5240.jpg)
4. This is the place to start pulling the door card, so the lower popper studs come out first...
(http://i53.photobucket.com/albums/g78/chubbylover88/DSCF5241.jpg)
5. The whole door card pops off really easily - except for here, where you need to slide it back from the tweeter cover...
(http://i53.photobucket.com/albums/g78/chubbylover88/DSCF5244.jpg)
6. Door card removed...
(http://i53.photobucket.com/albums/g78/chubbylover88/DSCF5243.jpg)
7. Here's what's behind the door card...
(http://i53.photobucket.com/albums/g78/chubbylover88/DSCF5242.jpg)
8. Be careful not to break a popper stud :( ...
(http://i53.photobucket.com/albums/g78/chubbylover88/DSCF5245.jpg)
11. Speaker connector plug (out of focus!)...
(http://i53.photobucket.com/albums/g78/chubbylover88/DSCF5248.jpg)
12. 6" speakers (152mm). Very basic paper cones...
(http://i53.photobucket.com/albums/g78/chubbylover88/DSCF5250.jpg)
Post by: Hemmi on July 13, 2008, 17:49:21
Post by: Shambles on July 13, 2008, 18:01:50
De-riveting shouldn't be a problem, unless they start to turn when being drilled.
Post by: eye30 on July 13, 2008, 18:37:58
Brill step by step guide better than Haynes!
Now for the rest of the car!!!!!!!!
Post by: tiny on July 13, 2008, 19:08:27
Post by: Dazzler on July 13, 2008, 22:01:48
Post by: tzwientjuh on July 16, 2008, 18:28:23
oh well :p
Post by: peterlee on July 28, 2008, 10:01:22
Post by: Dazzler on July 28, 2008, 10:07:32
Post by: syecadelic on January 20, 2009, 15:34:44
Just out of interest, are the rear speakers the exact same mount as the front ones?
In the getz the rear door speakers were the same, but the mount was different, as they space was less deep. Therefore this meant a custom mould was needed, which I didn't bother with.
One small problem i can see here... can you remove that speaker mount, because it looks like you can't, or can you remove the speakers and change them...
I though it would be something like how you showed, but the getz had a slightly different set up, il post pics about it sometime.
Post by: tzwientjuh on January 20, 2009, 17:04:18
Post by: syecadelic on January 20, 2009, 18:39:53
i have nevr done it before and would be scared of wrecking it
Post by: Shambles on January 20, 2009, 18:43:48
wud that not be really hard to do?
i have nevr done it before and would be scared of wrecking it
Nah. Those rivets will easily drill out using an 8mm bit
Post by: tzwientjuh on January 20, 2009, 18:50:45
http://www.pioneer.eu/eur/products/car_accessories/Hyundai/i30/10_2006/index.html
Then when the drilling is done, you must use some kind of spacer where you can mount the speaker on
Front
(http://www.pioneer.eu/images/products/cars/pioneer/hyundaii30-fd-hy02a_large.jpg)
Back
(http://www.pioneer.eu/images/products/cars/pioneer/hyundaii30-rd-hy02a_large.jpg)
Post by: syecadelic on January 20, 2009, 19:15:09
Hopefully the mount that i have from the getz will fit. :D
Post by: tzwientjuh on January 20, 2009, 19:24:48
spacer?? is that not the same thing that it is on at the minute??I don't get it :rolleyes:
Post by: syecadelic on January 20, 2009, 19:52:06
They are from when i installed speakers in the front of the getz, i have removed them an installed a set of Kenwood ones, a lot better, but despite the different make it shows how similar it is to the i30(by the sounds of it) and shows how i mounted them using original equipment.
Unfortunately im having problems uploading the pics 2 here.. mite b 2 large..
anyway follow this link to my bebo page (like myspace etc) and you can see them here.
the size of the mount that i have is approx 175 mm diameter from one hole to another.. is this the smae as the i30?
http://www.bebo.com/PhotoAlbumBig.jsp?PhotoNbr=1&MemberId=20249519&PhotoAlbumId=9916734351
Post by: tzwientjuh on January 20, 2009, 20:32:50
Post by: syecadelic on January 20, 2009, 20:39:46
Do you see what I mean now?
I gues I won't know myself untill i get the panels off the i30. just would like to find out now so it will make things easier in the long run,
Post by: tzwientjuh on January 20, 2009, 20:41:54
Thank you..Yep, now I understand ;)
Do you see what I mean now?
I gues I won't know myself untill i get the panels off the i30. just would like to find out now so it will make things easier in the long run,
by the way, going to delete the coment i put about the link will be pasted, incase u wna delete urs.. so i look less stupid :D
And I deleted my post too
Hope everything goes right!
Post by: jarsski on June 01, 2009, 20:00:06
..That door looks so technical, Im about to leave my tweeter issue to the professionals
thanks :)
Post by: Shambles on June 01, 2009, 20:14:31
i30manUK has abandoned our club (he probably sold his wife's i30 or just got bored) so don't wait too long for an answer from him :'(
Post by: L30N on April 11, 2010, 22:25:12
Post by: Dazzler on April 11, 2010, 22:29:38
Post by: Abomination on May 05, 2010, 16:57:31
Thanks so much.
Post by: yanivr23 on April 01, 2011, 13:49:41
the pics are great//to bad i found this site after i already removed the door cards :lol:
does anyone have the picture of what is under the silver plate? could be that those rivets of the speakers are internal screws? (needed to be opend from within the door after removing the silver plate?!)?
thanks fox
P.S i will upload pictures of how to remove the radio trim for those who don't have the upper tray above the radio
Post by: Dazzler on April 01, 2011, 22:35:23
Post by: syecadelic on April 02, 2011, 01:03:46
hi
the pics are great//to bad i found this site after i already removed the door cards :lol:
does anyone have the picture of what is under the silver plate? could be that those rivets of the speakers are internal screws? (needed to be opend from within the door after removing the silver plate?!)?
thanks fox
P.S i will upload pictures of how to remove the radio trim for those who don't have the upper tray above the radio
hey dude, the speakers are riveted in, so you need to drill them out. after that re-riveting is the only way, unless you can get plastic gromits to allow screws to thread into them.
welcome :D
Post by: kohan on July 09, 2011, 20:56:56
(http://kohan.1g.fi/Hosting/load/i30/Vanhakajari.jpg)
I added correct cables for new speakers and a sealing for assebly.
(http://kohan.1g.fi/Hosting/load/i30/Assenbly.jpg)
(http://kohan.1g.fi/Hosting/load/i30/Ready.jpg)
Some "noise reduction" is added...
(http://kohan.1g.fi/Hosting/load/i30/Doorpanel.jpg)
Around spare wheel
(http://kohan.1g.fi/Hosting/load/i30/Takakontti.jpg)
But more is needed to be done. Original isolation is next to none.
Post by: 2i30s on July 09, 2011, 23:30:19
Post by: Dazzler on July 09, 2011, 23:35:36
Post by: 2i30s on July 10, 2011, 00:50:46
:whsaid: I was just about to post the same thing word for word :-[great minds think alike. :lol: :goodjob:
Post by: Alasama on July 10, 2011, 03:39:40
Do we have a function to add the specific post to personal profile ? (like bookmark in favorate)
In that case, we can find some useful knowledge quickly.
Post by: 2i30s on July 10, 2011, 11:59:00
Nice photo guide indeed. :goodjob:there is a search function up the top of the page,give it a try. :idea: :winker: :razz:
Do we have a function to add the specific post to personal profile ? (like bookmark in favorate)
In that case, we can find some useful knowledge quickly.
Post by: Shambles on July 10, 2011, 12:03:22
Nice photo guide indeed. :goodjob:there is a search function up the top of the page,give it a try. :idea: :winker: :razz:
Do we have a function to add the specific post to personal profile ? (like bookmark in favorate)
In that case, we can find some useful knowledge quickly.
Or click the "Notify" button at the top of the topic :)
Post by: Alasama on July 11, 2011, 09:54:04
Post by: 2i30s on October 13, 2012, 03:55:33
Post by: Doggie 1 on October 13, 2012, 05:36:48
Post by: 2i30s on October 13, 2012, 07:32:49
You have led mirror covers? :lol:yeah, a very kind i30ownersclub.com member gave them to me. :cool: :goodjob2: :goodjob:
Post by: rustynutz on October 13, 2012, 12:37:44
And congrats on hitting 11000 posts....
Post by: 2i30s on October 13, 2012, 21:30:01
You're a lucky chappy, Steve..... :goodjob:thanks Russ. :mrgreen: but i didn't even notice until you mentioned it. :-[ :snigger:
And congrats on hitting 11000 posts....
Post by: i30niko on October 20, 2012, 09:50:47
I am assuming the process is the same for rear-doors??
Post by: jfdelacruz on November 24, 2012, 15:20:44
Post by: 2i30s on December 11, 2012, 10:45:22
Great post,yes,almost the same. :razz:
I am assuming the process is the same for rear-doors??
Post by: 2i30s on December 11, 2012, 10:47:08
Sorry to revive an old thread but, how big was the original wire size for the speakers? I'm thinking of upgrading mine and researching everything before I open up the door cards...i never looked at the speaker wire when i had the door pulled apart,so i cant answer that one. :undecided: