Tha Original i30 Owners Club
MODIFYING OR DETAILING YOUR I30 => ELECTRICAL | ELECTRONIC | AUDIO => Topic started by: PhilipI30Fastback on June 20, 2025, 08:06:47
-
After i installed a bigger display the car gives me every 5 to ten minutes a note that i sound operate the System while the engine is running. I think that the Radio needs a pin that gives the information that the alternator is Running. But i dont know wich one i need to switch so that it is giving the information. The new display has the Part number : 96550G4000PMP the old one has the Part number : 9617064210PMP. Can somebody offer help or an Plan where i can See every pin of the newer display (96550G4000PMP)
The Image of the fault: : :link: 20250618-173441 hosted at ImgBB — ImgBB (https://ibb.co/ds7tjQm3)
in the display
-
After i installed a bigger display the car gives me every 5 to ten minutes a note that i sound operate the System while the engine is running. I think that the Radio needs a pin that gives the information that the alternator is Running. But i dont know wich one i need to switch so that it is giving the information. The new display has the Part number : 96550G4000PMP the old one has the Part number : 9617064210PMP. Can somebody offer help or an Plan where i can See every pin of the newer display (96550G4000PMP)
The Image of the fault: : :link: 20250618-173441 hosted at ImgBB — ImgBB (https://ibb.co/ds7tjQm3)
in the display
IGN 1 is not pin 32 on connector B, it is pin 32 +pin 33. Resolves battery warning problem.
-
I’m not sure I fully understand this part: “IGN 1 is not pin 32 on connector B, it is pin 32 + pin 33.”
Could you please explain what exactly you mean by that?
If possible, could you please send a simple description, photo, or pinout example of how pin 32 and pin 33 should be connected in practice?
Thanks a lot in advance.