i30 Owners Club
GOT PROBLEMS OR ISSUES? => GENERAL => Topic started by: echocae on July 28, 2008, 13:54:18
-
is easy...
tool required is 1x Philips Screw and 1x slotted screw.
OPEN the bonnet 1st.. then take out all the pins with slotted screw driver.. (bcare full not to snap them), and then
use philips head to open the screw on the bonnet guard in near the front tyre..., and t
go under the car with slotted screw driver.. and take out all the pins again..
and thats it...