i30 Owners Club

Accesory cigar lighter sockets

Davo · 7 · 2427

0 Members and 1 Guest are viewing this topic.

Offline Davo

  • 1st Gear
  • *
    • Posts: 1
 :evil: I run a CB in the I30 petrol, powered from a front accessory socket. However although I have tried two different plugs, each is a very sloppy fit and after a few kilometers disconnects.
         This had not happened with previous makes of car, so I wonder if the sockets are of larger and non standard to every other car?
regards from Dave


ouri30
Davo,

I use both sockets on a regular basis and have had no issues at all.  Never had to push in the adapter to reseat it.  Firm as a ... (no can't say that here).

Bob


Offline Dazzler

  • Admin
  • *
  • Laughter is the best medicine...
    • Posts: 67,423

    • au Australia
      Devonport Tasmania

  • Best Car Forum on the Net
No problems here either I have GPS plugged into one and mobile charger in the other (sometimes hands free bluetooth charger.. very occassionally if bumped I have to reseat one or the other...
  • 2021 MG PHEV ( had 4 x i30 plus a Getz an Elantra and a Tucson)


Offline bumpkin

  • V.I.P
  • *
  • Keeping it in the family!
    • Posts: 8,022

    • scotland Scotland
      Aberdeen
Same for me, GPS has never disconnected.
  • Kia Sportage 3, 1.7 CRDi EcoDynamics


Offline Lorian

  • V.I.P
  • *
    • Posts: 3,465

    • gb United Kingdom
      Midlands

  • Midlands, UK N-Line T-GDi
Maybe the current is high, the connector has some resistance and is heating up?


Offline L30N

  • 3rd Gear
  • *
    • Posts: 241

    • gb United Kingdom
      Wallsend, North Tyneside, UK

  • Wallsend, UK
I had the opposite problem, the 12v plug got stuck and I had to pull the whole socket out. I put it down to the particular charging plug rather than the socket as other appliances have been fine.


Offline Myowni30

  • 5th Gear
  • *
    • Posts: 910

  • Midlands, UK
The newer car sockets are not quite as deep as the older versions and this can lead to your problem.  Some adapters or plugs do a disk which can be fitted to them on the end to stop them moving from side to side which solves the problem.

Cannot find picture at the moment  :lol:


Unread Posts

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal