[mrpayner]

OK .. so I've decided to order the below LED globes [for the Hyundai and the Mazda] to "R&D" them to see if they're okay.

I agree with @CraigB that they should have LED's in every which way possible to get the best result .. They're cheap, hopefully there's no flicker..

Adz

[CraigB]

They look the same as the first classic car led indicators I used, they’re good but extremely bright which is why I changed to the second generation bulbs at 700lm.

[The Gonz]

The combination DRL/blinker 'switchback' set that I got for Firty are like these:

2x B15S 42-LED Car Dual-Color Switchback White DRL Yellow Turn Signal Light | eBay

From the set of images included on the site you can see that they cover very well both side illumination (three facets) and head-on, so anything of that style will work really well - it does for me!

[Mutley]

@DeeTee @Blazorax Did you guys or anyone else ever find out if the interior bulbs near the rear handles can be replaced? Or @Dazzler did that FB guy ever find out if they are permanent yellow?

[Blazorax]

I still have it yellow on mine ... cannot find a white one.

[Mutley]

Mmmm looks like maybe it's not straight forward since they are similar to this....
"Your vehicle is equipped with LED lamps. LED lamps do not have replaceable bulbs." - License Plate Light Bulb Replacement; Interior Light Bulb Replacement - Hyundai Elantra GT 2018 Owner's Manual [Page 437]

[Dazzler]

@DeeTee @Blazorax Did you guys or anyone else ever find out if the interior bulbs near the rear handles can be replaced? Or @Dazzler did that FB guy ever find out if they are permanent yellow?

I'll ask him through Messenger. By coincidence I need to ask him something else. One side of my DRL's on the SR has stopped working and I wondered if it could just be a globe or a fuse before I take it in for a warranty fix. He is a Hyundai Master Technician.

[Mutley]

Cool thanks. My local dealer had a look into it for me and just got back to me... he said this - "Looks like a led bulb soldered into the board."

[Dazzler]

Cool thanks. My local dealer had a look into it for me and just got back to me... he said this - "Looks like a led bulb soldered into the board."

Tim hasn't had a chance to confirm (he forgot) but that was definitely what he suspected.

[The Gonz]

LEDs can be de-soldered and replaced if the specs are known.

[Mutley]

Thanks. Yeah I could do it but don't want to void warranty at this stage....

[Mutley]

In case anyone is interested, my dealer sent me these photos...

[The Gonz]

I'm so tempted to take that and make it good.

[quankino]

HYUNDAI i30N (HATCHBACK) - LED PACKAGE ? iilumo

A whole package from Aussie seller.

[Dazzler]

Good find!

[ohwreg]

Can somebody tell me which kit I need for upgrading to LED interior lights on my GD? I was looking at this. The seller wasn't helpful.

I noticed that the red lights on the bottom of both front doors never light up. Are my bulbs gone or are they just reflectors?

[CraigB]

Can somebody tell me which kit I need for upgrading to LED interior lights on my GD? I was looking at this. The seller wasn't helpful.

I noticed that the red lights on the bottom of both front doors never light up. Are my bulbs gone or are they just reflectors?

The seller probably wasn't much help as you were looking at an led kit for an Alfa  Most if not all of the GD interior bulbs are 31mm, I'd check them first or look at your vehicle manual for the specs/amount required.

Inside lower doors are just reflectors.