0 Members and 3 Guests are viewing this topic.
Thanks for the update. Good luck and best wishes. G
hi tw2005i did compare the high pressure fuel pump both have the same part number from BOSCH. i moved the fuel pump sensor from the old engine to the new engin. just incase there are something that are different. either there is a timing different from the 90bhp and 116 bhp. because here in europé the 90 bhp its a environmental friendly engine and the 116bhp its not. it has to be some difference on the software and the camshaft position . i mailed the company that sold me the engine. they told me they have the ECU for the engine, but i recall the ECU are coded with the immobilizer , not sure if that is correct , anyone could confirm that ?here is the chassi number for both cars. my car chassi number is TMADC51TP9J031263the used engine chassi number is KMHDC51TP8U052244i think gary refer to camshaft position sensor .i compare the fuel pressure regulator it has the same part number also.
i did not swap over the fuel rails only the injectors .
SteveThis time ( ) I agree with Gerard that we need pictures of your work.As I said, the i30s we get here have differences to your EU models. To amplify what Gerard is pointing out...........................Unless there is a screw up in the data; The 2009 rail shown above is what I would expect on the 2007 model. The rail, reg and pump need to match up.Also, the loom will be different.
TW2005 sorry for late reply busy like crap this 2 days. thanks for helping me breaking down all the parts comparison. my car is 2009 and the engine i bought was a 2007-2008.i will go to my garage tomorrow and snap some picture. i will double check the fuel rails and the thickness of all the hose. just to make sure.since the cam are the same i just curious why it leave a fault code also i changed the cam sensor but still get same fault code. the minute it crank i get the code P0341 right away.since i took everything from my old engine to the new engine because new engine nothing match up , turbo, intake, manifold, everything was different and hyundai dealer told me the bottom and the head everything its the same. thats why i took the chance to swap everything over. so the loom fits , the only different is the 2007-2008 engine have a oil sensor and the 2009 engine do not have oil sensor on the bottom of the pan. also i bought oil filter i notes even the oil filter is different size. but that should not interfere the car to start. when i crank quite some time. it ignite 1 time and it flat out again. what are the possibility different crank cause it not to fire ? can the stroke be different ? man, i don't know how much i appreciate all the help from you all. u guys are super.