That is nice to know. My Owners manual says :-
To change headlight bulb
1. Turn off the engine and open bonnet
2. Disconnect the negative battery cable
3. Loosen the assembly retaining nuts and screws
4. Pull out both sides of the front bumper and then pull out the front bumper
5. Remove the headlight assembly from the body of the vehicle. (If you can reach the bulb you do not need to do step 3, 4 and 5
6. Disconnect the power connector from the back of the headlight assembly
7. Remove the cover by turning it clockwise
8. Disconnect the headlight bulb socket connector
9. Unsnap the headlight bulb retaining wire by depressing the end and pushing it upward
10. Remove the bulb from the headlight assembly
11. Install a new bulb and snap the headlight bulb retaining wire into position by aligning the wire with the groove in the bulb
12. Connect the headlight bulb socket connector
13. Install the headlight bulb cover by turning it clockwise
14. Connect the power connector to the back of the headlight assembly
15. Reinstall the headlight assembly and bumper to the body of the vehicle.