i30 Owners Club

Brake light replacement - help!

0 Members and 2 Guests are viewing this topic.

Offline johnnynostars

  • 1st Gear
  • *
    • Posts: 1
Hi there,

Has anyone had any experience in replacing the brake lights on the i30?

I am able to unscrew the four screws identified in the owner's manual, but I can't get the panel off to access the bulb itself.

I assume that the fittings are the same on all i30s, but I have an i30 SR, if that helps.

I really want to do this myself as I was quite annoyed at paying $70 for a headlight bulb replacement through my dealer!

Cheers!


Offline Dazzler

  • Admin
  • *
  • Laughter is the best medicine...
    • Posts: 67,423

    • au Australia
      Devonport Tasmania

  • Best Car Forum on the Net
Welcome Johnny one star  :winker:

The headlight globes are easy replace (see how to thread on here)

Haven't done the brake lights but someone on here should be able to help  :D
  • 2021 MG PHEV ( had 4 x i30 plus a Getz an Elantra and a Tucson)


Offline beerman

  • V.I.P
  • *
    • Posts: 4,596

    • au Australia
$70? What a rip off......My bloke does them as a customer service.
  • A woman drove me to drink and I didn't even have the decency to thank her..


Offline 2i30s

  • Top Gear
  • *
    • Posts: 12,402

    • au Australia
      Hampton Park,Vic
i have changed a brake light globe on my wife's cw, twice.  the hatch tail light is held in the same way.

1.open the plastic covers hiding the screws.
2.remove the screws.
3.to remove the tail light you need to give it a bit of a firm pull. [carefully]
4.looking at the back of the light Assembly it has globe sockets with wires coming out of them.
 turn the socket anti clock wise to remove the globe socket from the light.
5.to remove the globe from the socket ,carefully push the globe in a bit and turn it anti clock wise.
  i hope this helps you.     :razz:
  • 2009 manual sx hatch and 2009 automatic sx cw. both 2.0 petrol.


Unread Posts

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal