The Original i30 Owners Club

THE GARAGE (SERVICE, MAINTENANCE & REPAIR) => DIESEL => Topic started by: NATHAN_P on April 03, 2017, 07:56:07

Title: How to check if the HYUNDAI I30 1.6L CRDI DIESEL GLOW PLUG are working ?
Post by: NATHAN_P on April 03, 2017, 07:56:07
How to check if all the HYUNDAI I30  1.6 CRDI DIESEL GLOW PLUG are working ?
Disconnect and check resistance and how many ohms ? :)
Title: Re: How to check if the HYUNDAI I30 1.6L CRDI DIESEL GLOW PLUG are working ?
Post by: tw2005 on April 03, 2017, 08:32:09
Quote from: NATHAN_P on April 03, 2017, 07:56:07
How to check if all the HYUNDAI I30  1.6 CRDI DIESEL GLOW PLUG are working ?
Disconnect and check resistance and how many ohms ? :)

manual quotes

Check the continuity between the terminal and body as illustrated. Replace if discontinuity or with large resistance.

--------------------------------------------------------------------------------

Standard value : 0.25Ω

depending on how good your meter is but allow for the lead resistance
Title: Re: How to check if the HYUNDAI I30 1.6L CRDI DIESEL GLOW PLUG are working ?
Post by: NATHAN_P on April 04, 2017, 05:32:12
Sorry illustrated where?
Title: Re: How to check if the HYUNDAI I30 1.6L CRDI DIESEL GLOW PLUG are working ?
Post by: tw2005 on April 04, 2017, 08:34:51
Quote from: NATHAN_P on April 04, 2017, 05:32:12
Sorry illustrated where?

well I was copy and pasting the text so I did not put the image up. You would disconnect the power bar from the glows and then terminal post to the base of the plug would be the resistance.

How about  a nice video.  Can't comment on th evalues he's quoting , just the method.

https://www.youtube.com/watch?v=4Po_1pNHE1Y (https://www.youtube.com/watch?v=4Po_1pNHE1Y)

Oh, and these can seize in the head and break off if you're considering removing them.
SimplePortal 2.3.5 © 2008-2012, SimplePortal