0 Members and 2 Guests are viewing this topic.
Thanks for those photos too Tony but do you think there really would be enough ground clearance under the i30 to do that (even with plastic cover removed)
I think the next idea is either under a seat (maybe the driver if there's room) I dont think so or on the interior roof with a nice cloth cover (directly above where it currently sits).Will block rear vision to a dangerous extend .. just had a look at Trish's CW
5" by 23" diameterI have also pondered making a new home for it on the passenger side wall of the boot. That would require a bit of work with fiberglass probably.
Quote from: stochastic on January 30, 2012, 09:54:485" by 23" diameterI have also pondered making a new home for it on the passenger side wall of the boot. That would require a bit of work with fiberglass probably.That's about the only logical alternative spot.I've seen it done with Falcon station wagons in Oz when they fit a third row of seats in the rear.
apologies for the delay, and awesome iPhone picturesbut hope they give you an idea of the OEM finish.with the OEM set up, everything sits flush when the seats are down. (I should mention that the 'carpet' cover is actually different from a non full size set up. (stronger)with the OEM set up you also end up with a small opened cubby hole, handy for work gloves etc.
Another tip - as I hate dirty spare wheels in the boot - is to carry a bin liner with the spare. Not only can you kneel on it when changing the wheel but the dirty (punctured) wheel can go into it to keep the boot contents clean.