0 Members and 1 Guest are viewing this topic.
Whats the main difference between them and Australian made springs? will you get matched damping too?
The front looks about 1- 2 deg negitive camber which is what i wanted, but i have whiteline front strut camber bolts if i need more or less.I have about a 2 finger gap up front and about 1 finger gap in the rear between guards and tyre , before i could fit my whole hand, it looks so much better.So far very happy
When i have had the wheel alignment done i will upload some pics.
Unfortunately the rear has toe adjustment only and no camber adjustment , same with the front.
Next on my list is to upgrade the shocks to bilsteins as the stock shocks are ok but the rebound damping is a fraction fast with the new springs , but i'll wait until the shocks are starting to go.
Quote from: mrexcitement on April 08, 2015, 06:01:27Next on my list is to upgrade the shocks to bilsteins as the stock shocks are ok but the rebound damping is a fraction fast with the new springs , but i'll wait until the shocks are starting to go.You could end up waiting very long time. I'm at 227.000 km still on the stock shocks...
Bed time for this little duck, early start in the morning to go get the Eibach springs installed everything is happening all at once at the moment so there will be more photos due tomorrow.
* Shambles Wonders if Wilkinson Suspensions would come to the UK for a job