This is my LED stripes based lighting system mounting photo-guide.
1. Cut the LED stipes to desired lenght
2. Prepare power socket and socket handler with 8mm holes
3. Install power socket
4. Fit the handler on the bottom of the trunk shelf
5. Connect the LED stripes to the power socket
6. I have also prepared a cable holder on the second side of the shelf
7. Glue the stripes to the shelf.
8. Remove the plastic rail
9. Remove the orginal trunk light, instert a cable with power connector on the one side.
10. Connect the wires on the other side of the cable to the lamp power lines (red= +12V, brown=ground)
11. Insert the rail back into place
12. Mount the shelf and connect the power source
And here is the result: