Hi all,
I've just completed a swap from the standard to the supervision cluster in my i30, and thought I would leave some photos and my thoughts here for anyone else considering the swap.
(Please excuse the dustiness!)
Tools Required:
Trim Removal Tool
Phillips Head Screwdriver
Step 1:
Remove the lower trim cover by prying the sides and pulling it forward
Step 2:
Remove the top/soft half of the visor over the cluster by pulling forward, there are 6 clips holding it in.
(Sorry, didn't take a photo of this one)
Step 3:
Remove the 4x screws holding the underside of the visor
Step 4:
Remove the 4x screws from the existing cluster - 2x screws above, 2x screws below
Step 5:
Unplug the harness from the existing cluster
Step 6:
Reverse the process with the new cluster in place
Here's a short video of the indicator sounds, reverse sound, and a quick scroll through the normal menus
Thoughts:
- I love the new sounds it makes, and obviously the colour screen and dials look fantastic.
- The dash I got was out out a 2013 Diesel, and since it didn't have a DCT, the manual gears only indicate up to 6 (but obviously the car still engages 7)
- I haven't gotten the kilometers adjusted yet, but will plan on getting it done in the next week.
If anyone has any questions, i'd be happy to answer them.
