Congratulations for the great job!
For the opening / closing function you explained the cable connection!
Can you explain the camera connection as you promised?
When I connect the camera I will explain that too!
You have to extend the wires from the camera connector to run them from the tailgate all the way to the radio.
The camera wires are coloured so it is easy to install it.
Blue wire: camera power. Connect it on the reverse light. Also because I couldn’t got the signal wire on the radio to work I connected this blue wire in the signal pin hole (position a9 on the radio connector)
Red wire: video out (a15 pin hole on the radio)
Green wire: video ground (a14 pin hole on the radio)
Black wire: camera ground (a5 pin hole on the radio).
This diagram might help you.
Sent from my iPhone using Tapatalk